Selecting the correct band saw depends on the band saw machine and the tooth pitch calculation. If you follow these two steps, you’ll find it easy to select the correct band saw.
Two steps to select the correct band saw
A band saw is often made to measure. By following the steps below to select the correct band saw, you’ll feel confident that you are using the correct band saw that’s right for your workpiece, thereby minimising disappointment and the risk of buying the wrong item. By following these two steps, you will be able to select the correct band saw.
Step 1 Choosing a band saw - band saw machine
The band saw you will be able to use depends first and foremost on the band saw machine you have, as this determines the required height for the band saw (so that it can be positioned in the band saw machine).
TIP:
For machines without an automatic feed, a band saw with reinforced teeth is recommended.
Step 2 Choosing a band saw - tooth pitch calculation
It is important that the tooth pitch is correct if you want your band saw to work properly. Profile material and thin material are best cut using a fine tooth pitch and a 0-degree cutting angle, while it is better to cut solid or large bundles using a coarser tooth pitch and a more positive cutting angle.
TIP:
Many band saws can be used universally. However, to increase tool life on high-quality materials such as stainless steel and super alloys, the 10% Co band saw is recommended.
The best methodology for working out the correct band saw is to use the tooth pitch calculation.
For quick advice on the Phantom range of bandsaws, these are the specialists...
Band saw with special tooth 0° rake angle for thin profile material
Bandsaw with special tooth positive rake angle for large and medium-sized dimensions
Bandsaw with special tooth positive rake angle for steel and alloys extra wear-resistant
Bandsaw with reinforced tooth and slightly positive rake angle for universal use and 1st choice for structural steels
